MS SERIES

MSSeries.png
PHASE1-Phase Input / 1-Phase Output
KVA1kVA2kVA3kVA
INPUT (RECTIFIER) 
Input Voltage230V AC
Input Frequency50 / 60 Hz +/ - 5% Auto Sensing
PhaseSingle Phase
Input Power Factor>0.98 (Full Load)
BATTERY 
Battery Type Maintenance free seal lead-acid batteries
Re-Charge Time8 Hours to 90% Charged (Optional Larger Internal Chargers)
Battery Quantity368
Battery Voltage36V DC72V DC96V DC
Battery StartYes, UPS can be started without AC source.
INVERTER 
Output Rating1000VA / 700W2000VA / 1400W3000VA / 2100W
Output Voltage230V AC
Wave FormPure Sine Wave
Power Factor0.7
Frequency Range50 / 60 Hz + / - 0.5Hz
SynchronizationSlew Rate: 1Hz/sec Synchronizing Window + / - 5%
Voltage Regulation+ / - 2%
THD (Linear Load)<3%
Crest Factor3:1
Transfer Time0 ms
Efficiency (AC to AC)>83%
Overload<105%Continuous
105%  ~ 120%60 Seconds
120% ~ 150%10 Seconds
>150%Immediately Switches to Bypass
PROTECTION 
Short CircuitHold Whole System
Over TemperatureSwitch to Bypass
Noise SuppressionComplies with EN50091-2
Spike SuppressionComplies with EN61000-45
COMMUNICATIONS & MANAGEMENT 
Interface PortStandard RS232
Control PanelLED Status Display: Utility, Battery, Inverter, Bypass, Self Test, Overload, Load/Battery Level & Fault Conditions
Audible & Visual AlarmLine Failure, Low Battery, Transfer to Bypass, System Fault
SNMP AdaptabilitySlot for SNMP Card (Optional)
Application SupportUPSilion 2000 UPS Software For Novell NetWare, Windows 95, 98, NT, ME, 2000, XP, Linux
OVERALL CHARACTERISTICS 
Height x Width x Depth (mm)223 x 147 x 405mm365 x 130 x 480365 x 190 x 460
Weight
(Kg, with Battery)
15kg27kg36kg
Audible NoiseLess Than 45dBA (at 1 Meter)
Temperature0 - 40°C
Temperature WarningThe Battery Design Life is Based On a Temperature of 25°C
Humidity0% - 90% (Non-Condensing)
. Different specifications required are available.